Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Brock Poling
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=7337
Page 1 of 2

Author:  Brock Poling [ Thu Jun 29, 2006 4:11 pm ]
Post subject: 

Introduction

I have been acquiring tonewood for quite a while now, and along the way I have amassed a few sets that either no longer serve my needs or don't catch my eye the way the once did.

I will openly sell almost anything on the page, or I am willing to do barter deals, just contact me and let me know what you are thinking.

WANTED TO TRADE/BUY
Here is a smattering of stuff I am interested in trading for if you are so inclined. Brazilian Rosewood, LMI Special Grade Madagascar Rosewood sets, Adirondack Spruce, LS Redwood, Figured Hondo Mahogany, Cuban Mahogany, Old EIR with lots of dark reds and purples, high end cocobolo, ziricote, and maybe a few other things. Just let me know if you have something you want to trade, but this what I have my eye out for.


Pau Ferro
I have got a number or REALLY nice Pau Ferro sets from an ebay supplier. His stuff is really excellent. However, I don't find myself building many parlor sized instruments. So, I think I may sell/trade these sets.

Set 1 - $75 - SOLD - Tracy Leveque



Set 2 - $75 - SOLD - yukonarizona



Set 3 - $75 - or trade



Set 4 - $75 - or trade



Koa
This is a decent quality set of Koa. The sides have some wild grain and figure.

Set 1 - $95.00 - or trade




Madagascar Rosewood
I am almost certain that I am going to kick myself later for doing this.... but.... the first two sets are LMI special grade MadRose. As, I am sure you know LMI is out of this stuff and they don't have a firm estimate on when (or if) they will get more. (but I REALLY hope they get more... I love these sets.... so if you have some you want to trade or sell... contact me). The REASON I am selling it is because when viewed dry the sides and backs of these sets don't match perfectly. The sides are a little more brown, and the backs are a little more red. When wiped with naptha though the color is a good match - there is not noticable difference I can see. I have not had much luck convincing people that it will work out ok after they see these sets dry.   If you build on spec though you will have no problems.

Set 1 - $350 - or trade



Set 2 - $350 - or trade



These two sets are from Vikwood. They are ok, good tap tone, nice color etc, but just not in the same league with the LMI special sets.

Set 3 - $150 - or trade



Set 4 - $150 - or trade



Ropey Bubinga
I have quite a few sets of this that were all cut from the same billet. I will never use it all. I will sell two or three sets. Only one is listed here. They all look roughly the same. These are easily big enough to build a J200.

2 Sets available - $125 - or trade



Myrtle
Here are two nice sets of myrtle. They are not especially figured (however the first one has nice colors) and they will build fine guitars. I just have several sets of the 5A figured stuff now and don't think I will ever get around to using these.


Set 1 - $75 - or trade



Set 2 - $75 - or trade




Ziricote
I have a couple of nice sets of ziricote for sale. The first is a 3 piece back. The outside back pieces and the sides have a very nice book match. This might also look good with a center wedge of bocote, like Jimmy Caldwell just showed on one of his guitars. The second is a nice set that will build a classical or a 00 size guitar.


Set 1 - $100 - SOLD - Steve S.



Other Set Coming Soon



Osage Orange
I recently came into a couple of billets of Osage Orange and I decided to sell one of my sets. This stuff pings GREAT, and I have heard Al Carruth describe this as near BRW in terms of tap tone. However, I now have it coming out my ears. (The left side has been wiped with naptha to show you how nicely figured it is)

Set 1 - $90 - SOLD - Don Atwood



Ribbon Figured Sapele
I got this set from Frank Finocchio. It is very nice, but I have since acquired so much ribbon hondo mahogany and wild quilted sets of sapele that I doubt this one will ever get used. It has some saw marks on the other side of the back, but once it sands out you should still have a back that is .09" thick.

Set 1 - $40.00 or SOLD - Cocephus



Paduck
This is another set I got from Frank Finocchio. I develop a slight rash when sanding this wood so I am not going to work with this species any longer.

Set 1 - $45.00 or trade



Mystery Wood (Brazilian Cherry?)
I am not 100% sure what this wood is, some have told me it looks like Brazilian Cherry. I have had it for years and years and it came with a big pack of stuff I bought ages ago before I started keeping track of such things... It is a nice set though and will make a very pretty guitar.


Set 1 - $50 or trade



Custom Rosettes
I bought these a long time ago from a guy on ebay. They are very nicely made, but I doubt I will ever use them. (Just in case it isn't obvious, the top is not up for sale, just the rosette.)

Rosette 1 - Guitar $35 SOLD - Don Atwood
I.D - 4 7/32" O.D. - 4 7/8" Thickness - 5/32"



Rosette 2 - Uke $20 or trade
I.D. - 2 7/8" O.D. - 3 1/2" Thickness - 1/16"




NEW Ameritage Case
This is a brand new Ameritage case. I bought it and it didn't end up fitting my guitar. (With the possible exception of Calton's) I think Ameritage cases are just about the best cases on the market. They are built like a tank, and even have an onboard humidifier. Here are the specs:

Total Length - 42 1/2"
Lower Bout - 16 1/4"
Upper Bout - 11 1/4"
Waist - 10 3/4"
Total Body Length - 20"
Body depth - 4" @ the tail, and 3.25" at the heel. I can get a Finnochio Prima design in this case with a cutaway.

This case is built for a guitar with a cut away.

Case1 - $50 SOLD - PeterM







NEW Omega Heat Blankets
I have two extra Omega heat blankets. These are new and have never been used. The longer one is 6" x 36" (2.5W) and the shorter one is 6"x12" (2.5W)

Blanket1 - $50 or SOLD - Russell R



Blanket2 - $30 SOLD - Richard Kohman


Brock Poling38911.4271527778

Author:  Don A [ Mon Jul 10, 2006 4:20 am ]
Post subject: 

Brock, I'll take the Osage orange and rosette #1 if they are still available. I finally find out who was bidding against me on ebay for Payne's rosette's.

Author:  peterm [ Mon Jul 10, 2006 4:45 am ]
Post subject: 

Brock, I would take case number 1. Please PM me if still available!

Thankspeterm38908.5741087963

Author:  Steve Saville [ Mon Jul 10, 2006 5:35 am ]
Post subject: 

Brock,
Would you trade a nice set of cocobolo for the 3 piece Ziricote (first choice) or the Pau Ferro #3. I purchase the cocobolo set 2 months ago from an OLF sponsor, but I'm just too allergic to it. I paid $120 for the B/S set.
Thanks,
Steve




Brock Poling38909.0451041667

Author:  Brock Poling [ Mon Jul 10, 2006 6:03 am ]
Post subject: 

[QUOTE=Don A] Brock, I'll take the Osage orange and rosette #1 if they are still available. I finally find out who was bidding against me on ebay for Payne's rosette's. [/QUOTE]



They're yours. I will PM you with the details.

Author:  Brock Poling [ Mon Jul 10, 2006 6:04 am ]
Post subject: 

[QUOTE=peterm] Brock, I would take case number 1. Please PM me if still available!

Thanks[/QUOTE]


Ok Peter. I will hold it for you. You might want me to get you the depth dimensions. I think it is going to require a thinline guitar.

If it doesn't matter let me know, but I will hold it for you and when I get home I will post the depth dimensions.


Author:  peterm [ Mon Jul 10, 2006 6:48 am ]
Post subject: 

Thanks Brock....
I'll let you know then.


Author:  John Elshaw [ Mon Jul 10, 2006 9:06 am ]
Post subject: 

Hey Brock,

Is your Pau Ferro set #2 large enough for a classical? I've never built a parlor and am not sure on the exact size.

Thanks!

John

Author:  Don Williams [ Mon Jul 10, 2006 11:59 am ]
Post subject: 

Hey....where's my fretboards???????

Author:  Steve Saville [ Mon Jul 10, 2006 12:08 pm ]
Post subject: 

I sent a PM offer/trade for the bubinga. Did you get it?

Author:  Brock Poling [ Mon Jul 10, 2006 1:04 pm ]
Post subject: 

[QUOTE=SteveS] I sent a PM offer/trade for the bubinga. Did you get it?[/QUOTE]

Yeah, I did, that works for me. I just packed up the set of Bubinga.

Author:  Brock Poling [ Mon Jul 10, 2006 4:06 pm ]
Post subject: 

[QUOTE=John Elshaw] Hey Brock,

Is your Pau Ferro set #2 large enough for a classical? I've never built a parlor and am not sure on the exact size.

Thanks!

John[/QUOTE]

Not as it is, but I do think there is enough there to allow you to take some of the excess and glue on wings that will allow you to get the lower bout in there. I looked at it this evening and I think you can do that and get nearly a perfect color match.

If it doesn't work out for you I will happily take it back.


Author:  Steve Saville [ Tue Jul 11, 2006 2:01 am ]
Post subject: 

OK, I'll get all that in the mail today.

BTW - wouldn't your Pau Ferro sets work for a OM or SJ with a 1-2" wide maple strip/wedge down the middle? That could look nice. Just a suggestion for those looking.

Author:  Brock Poling [ Tue Jul 11, 2006 2:03 am ]
Post subject: 


I measured the Ameritage case. The depth at the tail is 4" and behind the heel block it is 3.25"

I can get one of my Prima's (Frank Finocchio's design) in this case as long as it has a cutaway). The lower bout of the case is a little big for a prima though.





Author:  Don Williams [ Tue Jul 11, 2006 7:24 am ]
Post subject: 

Hey....where's my fretboards???????


Author:  LuthierSupplier [ Tue Jul 11, 2006 8:26 am ]
Post subject: 

Don,
I liked those fretboards too. I want one! Where are they Brock? Did someone sneak behind our backs and snag them?
Tracy

Author:  peterm [ Tue Jul 11, 2006 9:23 am ]
Post subject: 

Brock, i'll take the case....I figure i'll eventually make a thinline anyway!

Author:  Don Williams [ Tue Jul 11, 2006 9:27 am ]
Post subject: 

Hey....where's my fretboards???????

Author:  John Elshaw [ Tue Jul 11, 2006 9:57 am ]
Post subject: 

Hi Brock,

Thanks for the info! Would you mind measuring the back on Pau Ferro set #2? I think with a normal purfling line down the middle it might work for one of my smaller body Hausers. All I need is 7.25". I like your idea about the wings, I'm just not sure I could pull it off.

Thanks!

John

Author:  Cocephus [ Tue Jul 11, 2006 10:58 am ]
Post subject: 

Count me in for the Ribbon Figured Sapele if it`s still available.
Coe

Author:  Brock Poling [ Tue Jul 11, 2006 11:04 am ]
Post subject: 

[QUOTE=Cocephus] Count me in for the Ribbon Figured Sapele if it`s still available.
Coe[/QUOTE]

Yep, it is yours.

I will send you a PM.

Author:  Don Williams [ Tue Jul 11, 2006 12:26 pm ]
Post subject: 

Hey! Where's.....?

Author:  Brock Poling [ Tue Jul 11, 2006 3:20 pm ]
Post subject: 


Honestly, I got a mail telling me that I was on crack for even thinking about selling these things, and now I am second guessing the idea of selling any of those boards.

It is tempting, but I don't want to kick myself later for it.

If I decide to sell them, you will be the first person I contact... promise.   

Author:  Brock Poling [ Tue Jul 11, 2006 3:48 pm ]
Post subject: 


Here are a couple more sets to post

Ziricote

Set 2 - $185 (OM size)



Black Walnut
I have about 30 sets of nice walnut. Some of it has a couple of small knots and other small issues that need attention. None are severe, and given the figure in these sets certainly worth the effort, but since I have so much of it I usually reach for the pristine sets first.

Set 1 - $150



Set 2 - $150


Here is a close up of Set 2's figure

Author:  Serge Poirier [ Tue Jul 11, 2006 5:03 pm ]
Post subject: 

Holy Cow, that black walnut is somethin' else, i think i better look at Hesh's guitar cookies if i don't want to get into trouble deeper than i am already!

Very nice wood Brock, you got taste sir!

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/